It is recommended to replace the washing machine hoses occasionally as this can help avoid leakage and damaging of property. Defective hoses may crack or break and water seepages would occur resulting in expensive damages. So in this way, you can get rid of the washing machine hoses and ensure the continuous smooth working of your washing machine.
Here is the step-by-step guide on how you can do this, and some situations under which you should consult the services of washing machine repair Fort Lauderdale.
Why Replace Washing Machine Hoses?
Washing machine hoses are connectors that provide water to your washing machine. These hoses, however, can degrade over a period of time or become ridged and cracked or start to leak.
It is advised that most manufacturers should change their hoses every five years so that they do not develop some challenging issues.
The general check involves checking whether the hoses have developed cracks, bulges or leaks that might affect its functionality.
What You Will Need
Before starting the replacement process, gather the following materials:Before starting the replacement process, gather the following materials:
- New hoses for the washing machine (it is recommended to get the proper hoses for the washer).
- Bucket or towel
- Adjustable wrench
- Teflon tape (optional)
Step-by-Step Guide to Replacing Washing Machine Hoses
Turn Off the Water Supply
First of all, find the valves that supply water to your washing machine at the back of the machine. Twist these valves anti-clockwise if you want to open and close these valves in order to switch off the water supply. This step is important to avoid water from coming out when you remove the hoses soiling everything.
Disconnect the Old Hoses
Put a bucket or a towel near the connections to collect the excess amount of water in case it spills. With the help of an adjustable wrench, turn counterclockwise the connectors which are located at the both ends of the hoses as at the washing machine, and at the water supply. Otherwise, once loose one can unscrew it by applying his or her hands. Do not be surprised if a few drops of water splash out.
Inspect the Hoses and Connections
Once the old hoses have been discarded, check at the convenient times for any wear or other signs of damage. Inspect the connectors that are on the washing machine and those that supply water to the machine for any sort of dirt or rust. There are times that you need to clean the connections depending on your observation.
Attach the New Hoses
Using your new hoses first of all connect them with the supply water valves. As an option, you can additionally cover the threads of the connectors with Teflon tape so that the sealing will be more secure. Twist the connectors onto the valves by the hands; apply the wrench to tighten the connectors, but do not apply excessive pressure.
Connect the Hoses to the Washing Machine
Which is followed by connection of the other ends of the hoses to the connectors at the back of the washing machine. Again, initially tighten them by hand, then bring it in the wrench and tighten properly to use it. Check that the hoses are not twisted or bent, if they are then water flow can be restricted and hoses can leak.
Turn On the Water Supply and Check for Leaks
Tighten the water supply valves slowly in the anticlockwise position to allow the water to flow back in. While the water is running through the hoses ensure that all connections are tight and do not leak. If there is any dripping, then turn the nuts a tiny bit with the wrench tighter.
Test the Washing Machine
Select a short wash cycle to confirm that new hoses are well fixed and to check if they are leaking. During the cycle, safety checks the hoses and connections to ensure all of them operate as they should.
When to Call a Professional
Although changing washing machine hoses is a job that almost everyone can do, there are circumstances that require the help of a specialist. If you face any problems with the water supply valves, or the sides linking to the valves are corroded or damaged, it’s safer to consult an expert.
The best professionals in washing machine repair Fort Lauderdale can help in the proper replacement of hoses and keep your washing machine in good condition.
Preventive Maintenance Tips
To extend the life of your new hoses and prevent future issues, follow these preventive maintenance tips:To extend the life of your new hoses and prevent future issues, follow these preventive maintenance tips:
- Regular Inspections: It is also important to inspect your hoses once in every few months to ascertain their condition as far as wear and tear is concerned.
- Proper Installation: Ensure that the hose installation does not have any bends to allow pressure build-up within the hose as this may lead to hose failure.
- Use Quality Hoses: Use expensive flat braid stainless steel hoses than the rubber hose because they do not burst easily.
Conclusion
Hoses in a washing machine are easy to change, and it is recommended everyone does so to avoid costly water damage and improve performance. With reference to the steps mentioned above, one can replace his/her hoses in a safe and efficient manner.
But if you have any issues or would like to leave this to the real professional, feel free to call us at washing machine repair Fort Lauderdale.
If you stick to this guide, you will be able to carry out some basic maintenance that is necessary for the longevity of the washing machine and to make sure that you replace damaged parts before they get worse.
Keep an eye for more news & updates onBiscoverTribune.Org!
