While the thought of installing a kitchen faucet could be intimidating, the task becomes much more manageable with the correct resources and instructions. A reputable plumbing contractor Singapore can make the task more easy as they have the extensive knowledge of dealing eith various issues.
PS Plumber Singapore is one such reputable pumbing contractor who knows what they are doing and you can rest assured leaving your plumbing tasks to them. The following are the detailed steps to install your new kitchen faucet:
Gather Your Materials and Tools:
Before you start, gather all the materials and tools you will need. The usual requirements are:
- New kitchen faucet
- Adjustable wrench
- Basin wrench
- Plumber’s tape
- Basket Rags or towels
- Protective eyewear
- Use a flashlight if desired.
Turn Off the Water Supply:
Find the water shutoff valves under the sink and turn them clockwise to turn off the water supply. After that, to release any pressure and drain any remaining water in the lines, turn on the faucet.
Remove the Old Faucet:
Cut the water supply pipes to the old faucet using an adjustable wrench. If you want to collect any water that might drip from the connections, put a bucket or some towels underneath. After that, separate the nuts that are fastening the faucet by using a basin wrench. Carefully remove the old faucet from the sink after removing the nuts. Get rid of any dirt or residue from the old faucet by cleaning the area surrounding the sink before installing the new one. After wiping out the sink with a moist cloth, let it dry entirely.
Put in the New Faucet:
To put in the new faucet, follow the directions provided by the manufacturer. To begin, cover the sink’s faucet holes with a rubber or plastic gasket. Next, place the faucet in the holes and fasten it from the underside with the mounting nuts that came with it. Make sure not to overtighten the nuts as you use a basin wrench to tighten them.
Attach the Water Supply Lines:
After you’ve made sure the faucet is firmly in place, attach the water supply lines. You can make a watertight seal around the threads of the supply line links by wrapping plumber’s tape around them. Next, connect the supply lines to the hot and cold water valves located under the sink using an adjustable wrench. To avoid leaks, tighten the connections.
Locate Any Leaks:
Locate any leaks around the faucet connections by turning on the water supply valves. Tighten the connections even further or reapply plumber’s tape if you find any leaks. Use a rag or towel to soak up any extra moisture.
Test the Faucet:
After you’ve made sure there are no leaks, it’s time to test the faucet to make sure it’s working correctly. Make that the water is consistently flowing and the temperature is right by turning on the hot and cold water. Ensure that the sprayer and handle (if any) work properly by testing them.
Tighten Any Loose Components:
Inspect the faucet for any loose parts or components and secure them as necessary. All movable components, such as handles and spouts, fall within this category. To tighten any screws or fittings that are loose, use a screwdriver or an adjustable wrench.
Clean Up:
Clear your workspace and get rid of any packaging debris. To eliminate any dust or debris, wipe off the sink and surrounding area. Keep all supplies and tools in a secure location until they are needed again.
You should be proud of yourself; the new kitchen faucet is installed and working perfectly. Your new faucet can last for many years with the right care and attention. If you run into any problems while installing, make sure to refer to the instructions provided by the manufacturer or get some help from an expert.
Stay in touch to get more updates & news on Discover Tribune!
